What It Is & Does

1. Introduction
The CycleFlush head pump controller is designed to periodically flush the intake lines of the head on your boat so that water will not stagnate in the lines and start smelling.

Features:  
red Microprocessor controlled
red Dual relay for safety
red Preprogrammed flush and cycle times
red Convenient on / off switch
red Built in test mechanism to verify hookup
red Flashing light to indicate operation / status
red Easy installation
red Small size for convenient mounting of controller

2. Description
The Cycle Flush is enclosed in a plastic case with an attractive overlay describing the switches and hookup. The pump cycle time is preprogrammed for user convenience to activate every 6 hours to flush the intake line for 6 seconds, eliminating the stagnant water.


The On / Off switch is located in the lower left of the Cycle Flush. This switch determines if power is supplied to the circuitry. The red light next to the switch will indicate if power is on. When the Cycle Flush is running in the normal mode the light will blink on and off very slowly.


Price is $89.95 plus $7.50 S&H

For Secure Orders Click on the PayPal button


Return to Main Page